DC Board Replacement in Three Phase Inverters Kit Contents DC board Required Tools 5mm hex key Phillips screwdriver Torque wrench Removing the Inverter Cover 1. Move the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to discharge. 2. Switch off the Safety Switch (if applicable). 3. Disconnect the AC to the inverter by turning OFF the circuit breakers on the distribution…
Installation of DC Surge Protection Device in Three Phase Inverters This document describes how to install the DC Surge Protection Device (SPD) in a Three Phase Inverter. Kit Contents 5 DC SPD boards 5 bags with installation parts - each bag for single Installation Required Tools 5 mm hex key Torque Phillips screwdriver 3 mm flat screwdriver 3 mm torque socket driver wrench (long and narrow…
StorEdge Three Phase Inverter - External Choke Fans Replacement Kit Contents Fan bracket with three external choke fans and cables Required Tools Phillips screwdriver Replacing the External Choke Fans 1. Switch the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to discharge. 2. Disconnect the AC to the inverter by turning OFF the circuit breakers on the distribution panel. 3.…
DC-to-DC Unit Fans Replacement in Three Phase StorEdge Inverters Kit Contents Fan bracket with two fans and cables Required Tools 5mm hex key Phillips screwdriver Remove the Inverter Cover 1. Switch the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to discharge. 2. Disconnect the AC to the inverter by turning OFF the circuit breakers on the distribution panel. 3. Open the…
Front Cover Replacement in Three Phase StorEdge Inverters Kit Contents Front cover Required Tools 5mm hex key Replacing the Inverter Cover 1. Switch the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to discharge. 2. Disconnect the AC to the inverter by turning OFF the circuit breakers on the distribution panel. 3. Open the Allen screws of the inverter cover and carefully…