September 2015 1 Connecting Wi-Fi Using WPS – for Home Owners This quick guide describes how to connect your SolarEdge Wi-Fi device to a home network using a router with WPS push button security (Wi-Fi Protected Setup). WPS is a system built into modern broadband routers which allows pairing of devices without the need for a password entry. If your home broadband router does not have this feature…
September 2015 1 Connecting the Inverter Using Wi-Fi – for Installers NOTE For full installation and safety details, refer to the SolarEdge Installation Guide. Make sure you read, fully understand and follow the detailed instructions in it prior to each installation or service procedure. Failure to do so may result in injury or loss of life and damage to the equipment. This quick guide describes…
Application Note - Negative Power Values Displayed in SetApp If you have a StorEdge system installed, a negative power value may be displayed in the SetApp application, in the Status screen. For example: This only happens when your StorEdge inverter charges the battery from the AC grid, and not from PV modules, as it normally does. In this case AC power from the gird is converted into DC power,…
1 Application Note - SolarEdge Three Phase Home Backup Interface Commissioning With SetApp Version 2.xx Version History • Version 2 (July 2023) – Change in Figure 1 • Version 1 (June 2023) - Initial release Introduction The SolarEdge Home Backup solution provides backup power during grid outages. When a power outage occurs, the SolarEdge Backup Interface, Three Phase (BUI) detects the grid…