1 Communication Board Replacement in Three Phase Inverters Kit Contents Communication board Required Tools 5mm hex key Torque Philips screwdriver 3mm flat screwdriver Removing the Inverter Cover If the inverter cover is not already removed, use the following procedure for cover removal. To remove the inverter cover 1. Turn the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to…
1 MAN-01-00137-1.9 ZigBee/Wi-Fi Antenna Installation NOTE For maximum range, make sure to position the antenna upright. NOTE This option is only applicable for StorEdge Single Phase Inverters. 1.8” / 45 mm ZigBee/Wi-Fi Antenna Installation Kit Contents Antenna with the attached clip and cable Safety Information Please review the following safety guidelines, and observe them when handling the…
Installation Guide StorEdge Interface For the Single Phase Inverter with HD- Wave Technology and SetApp Configuration and LG Chem Batteries Version 1.1 Contents Disclaimers 2 Important Notice 2 Emission Compliance 3 Safety Warnings 3 Revision History 4 HANDLING AND SAFETY INSTRUCTIONS 5 Safety Symbols Information 5 IMPORTANT SAFETY INSTRUCTIONS 5 Chapter 1: Overview 8 The StorEdge Solution…