1 MAN-01-00654-1.3 StorEdge Three Phase Inverter Wiring and On Site Check Quick Guide StorEdge Three Phase Inverter with SetApp Configuration – Wiring and On Site Check Quick Guide for Europe, APAC and South Africa Revision History Revision 1.3 – November 2020 • Hungarian translation added. • SetApp configuration updated. Overview This document provides instructions for wiring and post-…
1 Communication Board Replacement in Three Phase Inverters Kit Contents Communication board Required Tools 5mm hex key Torque Philips screwdriver 3mm flat screwdriver Removing the Inverter Cover If the inverter cover is not already removed, use the following procedure for cover removal. To remove the inverter cover 1. Turn the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to…
1 MAN-01-00137-1.9 ZigBee/Wi-Fi Antenna Installation NOTE For maximum range, make sure to position the antenna upright. NOTE This option is only applicable for StorEdge Single Phase Inverters. 1.8” / 45 mm ZigBee/Wi-Fi Antenna Installation Kit Contents Antenna with the attached clip and cable Safety Information Please review the following safety guidelines, and observe them when handling the…
Front Cover Replacement in Three Phase StorEdge Inverters Kit Contents Front cover Required Tools 5mm hex key Replacing the Inverter Cover 1. Switch the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to discharge. 2. Disconnect the AC to the inverter by turning OFF the circuit breakers on the distribution panel. 3. Open the Allen screws of the inverter cover and carefully…