solaredge.com SolarEdge Home Smart Switch Model: SWT Optimize energy consumption by controlling appliance usage Controls dedicated permanently connected appliances Controls devices for increased backup time Increases savings and reduces grid dependency by maximizing solar energy consumption Seamlessly integrates into the SolarEdge Home ecosystem with SolarEdge Home Network Offers a single source…
ELECTRICAL SHOCK HAZARD E 2 Datasheet Training 1 C. Din rail adapterA. Screws B. Double sided tape Choose one of 3 options displayed below WARNING! Installation is allowed on up to 2000 meters of altitude Safety Information • For indoor use only • Keep children away from the device • DO NOT use with medical or life support equipment • DO NOT use in wet or damp area • DO NOT clean with liquid •…
1 Replacing Synergy Manager Bracket Replacing Synergy Manager Wall Mounting Corrosion Protective Bracket Instructions This manual describes how to replace a wall mounting corrosion protective bracket of Synergy Manager. Figure 1: Three Phase Inverter with Synergy Technology NOTE The Synergy Manager weighs 18 Kg. SolarEdge recommends two people remove the Synergy Manager from the bracket. Kit…
Version 1.1, January 2023 1 MAN-01-00826-1.1 DC Surge Protection Device Installation/Replacement in Three Phase Inverters with Synergy Technology DC Surge Protection Device Installation/Replacement in Three Phase Inverters with Synergy Technology P/N: SExxK-xxxxIxxxx NOTE There are two types of DC Surge Protection Device (SPD) mounting systems for Synergy Manager, Horizontal and Vertical mounting…
1 Communication Board Replacement in Three Phase Inverters Kit Contents Communication board Required Tools 5mm hex key Torque Philips screwdriver 3mm flat screwdriver Removing the Inverter Cover If the inverter cover is not already removed, use the following procedure for cover removal. To remove the inverter cover 1. Turn the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to…
Version 1.4 1 Application Note - Viewing and Setting Inverter Grid Protection Values Application Note - Viewing and Setting Inverter Grid Protection Values Version History Version 1.4, March 2023: Addition of “Vgrid Max 5” and “Vgrid Min 5” protection settings Version 1.3: January 2019: Update of compatible CPU versions Version 1.2: November 2018: New section on how to view and set grid…