Replacing Safety Switch Fuses with Terminal Blocks in Three Phase Inverters This document describes how to replace the DC fuses in the Safety Switch with DC terminal blocks. The supplied DC terminal blocks support cables with 2-8 AWG cross section. Kit Contents The kit is supplied with replacement parts for 5 inverters: Five (5) pairs of terminal blocks (labeled DC+ and DC-) Five (5) pairs of red…
Nov 2018 Application Note – Monitoring Portal User Settings Introduction This application note describes how to set your monitoring portal preferences. You can set various parameters, such as the language and currency display, and change your login password. User Settings The toolbar at the top right of the monitoring portal main window provides the following options: Home: returns to the site…
1 Communication Board Replacement in Three Phase Inverters Kit Contents Communication board Required Tools 5mm hex key Torque Philips screwdriver 3mm flat screwdriver Removing the Inverter Cover If the inverter cover is not already removed, use the following procedure for cover removal. To remove the inverter cover 1. Turn the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to…
ON/OFF/P Switch Replacement in Energy Hub Inverters Kit Contents ON/OFF/P switch with cables Mounting nut Gasket Plastic tie Required Tools 4mm Allen key Knife Pliers Removing the Inverter and Connection Unit Covers 1. Turn off the ON/OFF/P switch. Wait 5 minutes. 2. Turn off the DC switch on the Connection Unit. 3. Turn off AC to the inverter on the main distribution panel. 4. Release the Allen…