Replacing Safety Switch Fuses with Terminal Blocks in Three Phase Inverters This document describes how to replace the DC fuses in the Safety Switch with DC terminal blocks. The supplied DC terminal blocks support cables with 2-8 AWG cross section. Kit Contents The kit is supplied with replacement parts for 5 inverters: Five (5) pairs of terminal blocks (labeled DC+ and DC-) Five (5) pairs of red…
1 Communication Board Replacement in Three Phase Inverters Kit Contents Communication board Required Tools 5mm hex key Torque Philips screwdriver 3mm flat screwdriver Removing the Inverter Cover If the inverter cover is not already removed, use the following procedure for cover removal. To remove the inverter cover 1. Turn the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to…
AUTHORIZATION TO MARK Applicant: Manufacturer: Address: Address: Country: Country: 347265 1 Control Number: 4004590 Authorized by: for L. Matthew Snyder, Certification Manager This document supersedes all previous Authorizations to Mark for the noted Report Number. This Authorization to Mark is for the exclusive use of Intertek's Client and is provided pursuant to the Certification agreement…
Version 4.1, December 2023 Three-phase inverters - Replace fused or non-fused input boards with single input terminal blocks - Support Kit (DCD-3PH-1TBI) – North America 1 Three-phase inverters - replace fused or non-fused input boards with single input terminal blocks - Support Kit (DCD-3PH-1TBI) - North America Revision history Version 4.1, December 2023 – Added equipment grounding conductor…