Version 1.3, February 2024 Configure and Operate Load Control Devices 1 Configure and Operate Load Control Devices — Application Note This application note describes how to configure load control devices and the available operating modes for your customers. Revision history Version 1.3, February 2024: Latest Firmware version — 4.20. Home Network and Zigbee are now compatible Version 1.2, November…
Application Note - Negative Power Values Displayed in SetApp If you have a StorEdge system installed, a negative power value may be displayed in the SetApp application, in the Status screen. For example: This only happens when your StorEdge inverter charges the battery from the AC grid, and not from PV modules, as it normally does. In this case AC power from the gird is converted into DC power,…
Version 1.0, November 2021 1 Registering the SolarEdge Home EV Charger Registering the SolarEdge Home EV Charger After the EV Charger has been installed, make sure to register it in the SolarEdge Monitoring Platform. This will allow you to perform the following actions with the EV Charger in the mySolarEdge application: Monitor its status Associate a car/cars View the charging history Generate…
Version 5.1, September 2023 1 SolarEdge Solution Connection and Configuration Guide for Australia Here is information on connecting the SolarEdge Home Battery ("the battery") to a SolarEdge inverter and connecting the inverter directly or via the DC Combiner. Also, we explain the wiring steps for the SolarEdge Backup Interface and how to configure the solution using SetApp after the…