Three Phase Inverter with SetApp Configuration Quick Installation Guide For North America Version 1.0 SAVE THESE INSTRUCTIONS – This manual contains important instructions for the Three Phase Inverter that shall be followed during installation and maintenance. 1. Turn ON/OFF/P Switch to OFF (0) 2. Turn Safety Switch to OFF 3. Open cover screws Fasten screws in described order NOTE Turn ON/OFF the…
Replacing Safety Switch Fuses with Terminal Blocks in Three Phase Inverters This document describes how to replace the DC fuses in the Safety Switch with DC terminal blocks. The supplied DC terminal blocks support cables with 2-8 AWG cross section. Kit Contents The kit is supplied with replacement parts for 5 inverters: Five (5) pairs of terminal blocks (labeled DC+ and DC-) Five (5) pairs of red…
1 Communication Board Replacement in Three Phase Inverters Kit Contents Communication board Required Tools 5mm hex key Torque Philips screwdriver 3mm flat screwdriver Removing the Inverter Cover If the inverter cover is not already removed, use the following procedure for cover removal. To remove the inverter cover 1. Turn the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to…
Version 1.4 1 Application Note - Viewing and Setting Inverter Grid Protection Values Application Note - Viewing and Setting Inverter Grid Protection Values Version History Version 1.4, March 2023: Addition of “Vgrid Max 5” and “Vgrid Min 5” protection settings Version 1.3: January 2019: Update of compatible CPU versions Version 1.2: November 2018: New section on how to view and set grid…