Application Note - Negative Power Values Displayed in SetApp If you have a StorEdge system installed, a negative power value may be displayed in the SetApp application, in the Status screen. For example: This only happens when your StorEdge inverter charges the battery from the AC grid, and not from PV modules, as it normally does. In this case AC power from the gird is converted into DC power,…
1 S0 Meter Cable Adapter Setup Application Note – S0 Meter Cable Adapter Setup Version History Version 1.2, September 2020 S0 meter connection options Added SetApp configuration support Added Monitoring functionality Removed export limitation support Contents S0 Meter Cable Adapter Setup…
Version 1.5, May 2022 1 Application Note - SolarEdge Inverter - Alternative Power Source Version History Version 1.5 (May 2022) – add note - Disabled external control functions in Alternative Power Source mode Version 1.4 (March 2020) – Update of the minimum supported CPU version for three phase inverters to 4.8.xxx Version 1.3 (January 2020) – Addition of dry/wet contacts connection diagrams…
Application Note: SolarEdge Combiner Box Use Cases There are two options available to installers when installing a battery as part of a SolarEdge system. With the Combiner Box If one or more LG Prime batteries, or three SolarEdge Home Batteries are to be connected, connect the DC cables from the battery/batteries and the Power Optimisers to the Combiner Box. Then, connect the cables from the…
Version 1.0, November 2021 1 Registering the SolarEdge Home EV Charger Registering the SolarEdge Home EV Charger After the EV Charger has been installed, make sure to register it in the SolarEdge Monitoring Platform. This will allow you to perform the following actions with the EV Charger in the mySolarEdge application: Monitor its status Associate a car/cars View the charging history Generate…