1 Communication Board Replacement in Three Phase Inverters Kit Contents Communication board Required Tools 5mm hex key Torque Philips screwdriver 3mm flat screwdriver Removing the Inverter Cover If the inverter cover is not already removed, use the following procedure for cover removal. To remove the inverter cover 1. Turn the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to…
Installation Guide StorEdge Interface For the Single Phase Inverter with HD- Wave Technology and SetApp Configuration and LG Chem Batteries Version 1.1 Contents Disclaimers 2 Important Notice 2 Emission Compliance 3 Safety Warnings 3 Revision History 4 HANDLING AND SAFETY INSTRUCTIONS 5 Safety Symbols Information 5 IMPORTANT SAFETY INSTRUCTIONS 5 Chapter 1: Overview 8 The StorEdge Solution…
Front Cover Replacement in Three Phase StorEdge Inverters Kit Contents Front cover Required Tools 5mm hex key Replacing the Inverter Cover 1. Switch the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to discharge. 2. Disconnect the AC to the inverter by turning OFF the circuit breakers on the distribution panel. 3. Open the Allen screws of the inverter cover and carefully…
Digital Board Replacement in Three Phase StorEdge Inverters Kit Contents Digital board L-bracket + two bolts Required Tools 5mm hex key Phillips screwdriver Removing the Inverter Cover 1. Switch the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to discharge. 2. Disconnect the AC to the inverter by turning OFF the circuit breakers on the distribution panel. 3. Open the Allen…
CAN Bus Board Replacement in Three Phase StorEdge Inverters Kit Contents CAN bus board Required Tools 5mm hex key Phillips screwdriver Removing the Inverter Cover 1. Switch the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to discharge. 2. Disconnect the AC to the inverter by turning OFF the circuit breakers on the distribution panel. 3. Open the Allen screws of the inverter…