Version 1.3, February 2024 Configure and Operate Load Control Devices 1 Configure and Operate Load Control Devices — Application Note This application note describes how to configure load control devices and the available operating modes for your customers. Revision history Version 1.3, February 2024: Latest Firmware version — 4.20. Home Network and Zigbee are now compatible Version 1.2, November…
Application Note - Wi-Fi Password Configuration You can configure Wi-Fi communication using one of the following methods: l WPS (Wi-Fi Protected Setup) - a feature built into modern broadband routers which allows pairing of devices without the need for password entry. If the network uses a router withoutWPS, entering the network password is required. l Connecting to the Wi-Fi network generated by…
Version 1.0, December 2021 1 SolarEdge Single Phase Inverters with SolarEdge Energy Bank: Configuration Options SolarEdge Single Phase Inverters with SolarEdge Energy Bank: Configuration Options Version History Version 1.0 (December 2021) Introduction The SolarEdge Energy Bank (the “battery”) is supported by the following SolarEdge inverters, separately referred to in this document as the “…
Application Note - Negative Power Values Displayed in SetApp If you have a StorEdge system installed, a negative power value may be displayed in the SetApp application, in the Status screen. For example: This only happens when your StorEdge inverter charges the battery from the AC grid, and not from PV modules, as it normally does. In this case AC power from the gird is converted into DC power,…