Application Note - Wi-Fi Password Configuration You can configure Wi-Fi communication using one of the following methods: l WPS (Wi-Fi Protected Setup) - a feature built into modern broadband routers which allows pairing of devices without the need for password entry. If the network uses a router withoutWPS, entering the network password is required. l Connecting to the Wi-Fi network generated by…
Application Note - Negative Power Values Displayed in SetApp If you have a StorEdge system installed, a negative power value may be displayed in the SetApp application, in the Status screen. For example: This only happens when your StorEdge inverter charges the battery from the AC grid, and not from PV modules, as it normally does. In this case AC power from the gird is converted into DC power,…
Version 1.0, November 2021 1 Registering the SolarEdge Home EV Charger Registering the SolarEdge Home EV Charger After the EV Charger has been installed, make sure to register it in the SolarEdge Monitoring Platform. This will allow you to perform the following actions with the EV Charger in the mySolarEdge application: Monitor its status Associate a car/cars View the charging history Generate…
Version 2.2 January 2024 SolarEdge Home Battery – Emergency Response Guide 1 SolarEdge Home Battery – Emergency Response Guide Version History Version 2.2, January 2024: Added the sentence [SolarEdge Home Batteries leave the production line charged and packed with 30% SOC.] Version 2.1, August 2023: Updated Australian address in section Identification of Products and Company Version 2.0, October…