Three Phase Inverter with Synergy Technology Quick Installation Guide PN: SExxK-xxxxIxxxx For Europe, APAC and South Africa Version 1.7 Scan for full installation guide DE NL FR IT S PL S E HU ZH CZ TR 7 Turn ON/OFF the AC switch of the main circuit board. When turning off, wait 5 minutes for DC Voltage to drop to safe level before removing the front panel. 8 Turn the DC Disconnect Switch on/off…
Three Phase Inverter with SetApp Configuration PN: SEXXK-XXXXIXXXX Quick Installation Guide For Europe, APAC and South Africa Version 1.3 P. 01 > EN FR NL IT DE P. 23 > PL ES CHT PT SE EN FR NL IT DE EN 1. Turn ON/OFF/P Switch to OFF (0) 2. Turn Safety Switch to OFF 3. Open cover screws FR 1. Placer le commutateur MARCHE/ARRÊT sur ARRÊT (0) 2. Placer l’interrupteur de sécurité sur ARRÊT 3.…
Replacing Safety Switch Fuses with Terminal Blocks in Three Phase Inverters This document describes how to replace the DC fuses in the Safety Switch with DC terminal blocks. The supplied DC terminal blocks support cables with 2-8 AWG cross section. Kit Contents The kit is supplied with replacement parts for 5 inverters: Five (5) pairs of terminal blocks (labeled DC+ and DC-) Five (5) pairs of red…
Version 1.1, January 2023 1 MAN-01-00826-1.1 DC Surge Protection Device Installation/Replacement in Three Phase Inverters with Synergy Technology DC Surge Protection Device Installation/Replacement in Three Phase Inverters with Synergy Technology P/N: SExxK-xxxxIxxxx NOTE There are two types of DC Surge Protection Device (SPD) mounting systems for Synergy Manager, Horizontal and Vertical mounting…
1 Communication Board Replacement in Three Phase Inverters Kit Contents Communication board Required Tools 5mm hex key Torque Philips screwdriver 3mm flat screwdriver Removing the Inverter Cover If the inverter cover is not already removed, use the following procedure for cover removal. To remove the inverter cover 1. Turn the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to…