Version 1.3, February 2024 Configure and Operate Load Control Devices 1 Configure and Operate Load Control Devices — Application Note This application note describes how to configure load control devices and the available operating modes for your customers. Revision history Version 1.3, February 2024: Latest Firmware version — 4.20. Home Network and Zigbee are now compatible Version 1.2, November…
Version 1.3, March 2024 Technical Note – Compatibility Matrix for SolarEdge Home Three Phase Inverters and Batteries 1 Technical Note - Compatibility Matrix for SolarEdge Home Three Phase Inverters and Batteries Revision History Version 1.3, March 2024: Updated SolarEdge Home Battery 400V - Only 1 battery per inverter Version 1.2, November 2023 This matrix displays the compatibility between…
Version 1.1, April 2022 1 Technical Note - SolarEdge Home Network Plug-in Kit Selection Technical Note - SolarEdge Home Network Plug-in Kit Selection Refer to the table below to select the appropriate SolarEdge Home Network Plug-in kit for your inverter. For installation instructions, refer to the installation guide that comes with the kit. Inverter Inverter Part Number Inverter Cellular Socket…
Version 1.0, December 2021 1 SolarEdge Single Phase Inverters with SolarEdge Energy Bank: Configuration Options SolarEdge Single Phase Inverters with SolarEdge Energy Bank: Configuration Options Version History Version 1.0 (December 2021) Introduction The SolarEdge Energy Bank (the “battery”) is supported by the following SolarEdge inverters, separately referred to in this document as the “…