Replacing Safety Switch Fuses with Terminal Blocks in Three Phase Inverters This document describes how to replace the DC fuses in the Safety Switch with DC terminal blocks. The supplied DC terminal blocks support cables with 2-8 AWG cross section. Kit Contents The kit is supplied with replacement parts for 5 inverters: Five (5) pairs of terminal blocks (labeled DC+ and DC-) Five (5) pairs of red…
1 Communication Board Replacement in Three Phase Inverters Kit Contents Communication board Required Tools 5mm hex key Torque Philips screwdriver 3mm flat screwdriver Removing the Inverter Cover If the inverter cover is not already removed, use the following procedure for cover removal. To remove the inverter cover 1. Turn the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to…
Product name Power Optimizer Sxxx (Where xxx is any number, 0-9 to a maximum up to xxx=500) QualiTech EMC Laboratory 30 Hasivim Street, Petah-Tikva, 49517, Israel Tel: 972-3-926 6994 Fax: 972-3-928 7490 A sample of the above product has been tested by our Laboratory in November 2020 and found to be compliant with relevant sections of the following standards…