1 MAN-01-00735-1.0 - RS485 over RF Module - Technical Specifications RS485 over RF Module - Technical Specifications GENERAL Part Number SEPS-WT-XBEE Description Stand-alone RF modems provide reliable wireless connectivity over a range of up to 28 miles.* PERFORMANCE UNIT Indoor/Urban range 10 Kbps: up to 2000 ft. (610 m); 200 Kbps: up to 1000 ft. (305 m) ft./m Outdoor/RF line-of-sight range 10…
solaredge.com SolarEdge Home Load Controller Model: DCS Optimize energy consumption by controlling appliance usage Controls permanently connected appliances Includes two simultaneously controlled dry contact switches Switches larger single and three phase loads via an external contactor Wireless connection to the inverter via SolarEdge Home Network Increases savings by maximizing self-consumption…
ELECTRICAL SHOCK HAZARD What’s in the packageN DE NL Mounting optionsE DE N IT E 2 Cabling N Datasheet Training EN System Requirements and Safety InformationF I E 1 Choose one of the options below IMPORTANT: Installation is allowed at up to 2000m of altitude. Choose one of two options below Safety Information • For indoor use only • Keep children away from the device • DO NOT use with medical or…
Version 1.4, July 2024 Configure and Operate Load Control Devices 1 Configure and Operate Load Control Devices — Application Note This application note describes how to configure load control devices and the available operating modes for your customers. Revision history Version 1.4, July 2024: Updated SolarEdge Home Network devices compatibility Version 1.3, February 2024: Latest Firmware version…
1 RS485 Surge Protection Kit Installation Guide - MAN-01-00597-1.1 Dual-Channel RS485 Surge Protection Device Plug-in for Three Phase Inverters with SetApp Configuration - Installation Guide This document describes how to install the RS485 Dual-Channel Surge Protection Device (SPD) in a SolarEdge three-phase inverter. For more information on the surge protection device, see the datasheet at:…
Installation of DC Surge Protection Device in Three Phase Inverters This document describes how to install the DC Surge Protection Device (SPD) in a Three Phase Inverter. Kit Contents 5 DC SPD boards 5 bags with installation parts - each bag for single Installation Required Tools 5 mm hex key Torque Phillips screwdriver 3 mm flat screwdriver 3 mm torque socket driver wrench (long and narrow…
Knowledge Center