Version 1.3, February 2024 Configure and Operate Load Control Devices 1 Configure and Operate Load Control Devices — Application Note This application note describes how to configure load control devices and the available operating modes for your customers. Revision history Version 1.3, February 2024: Latest Firmware version — 4.20. Home Network and Zigbee are now compatible Version 1.2, November…
Version 1.1, April 2024 Heat Pump Control with SolarEdge ONE Smart Home System 1 Heat Pump Control with SolarEdge Home Load Controller — Application Note This Application Note describes how the Home Load Controller transforms a heat pump into thermal storage for excess solar energy and preserves battery life during a power outage. Revision history Version 1.1, April 2024: Included the Home Load…
1 Application Note - SolarEdge Three Phase Home Backup Interface Commissioning With SetApp Version 2.xx Version History • Version 2 (July 2023) – Change in Figure 1 • Version 1 (June 2023) - Initial release Introduction The SolarEdge Home Backup solution provides backup power during grid outages. When a power outage occurs, the SolarEdge Backup Interface, Three Phase (BUI) detects the grid…
Version 1.3, March 2024 Technical Note – Compatibility Matrix for SolarEdge Home Three Phase Inverters and Batteries 1 Technical Note - Compatibility Matrix for SolarEdge Home Three Phase Inverters and Batteries Revision History Version 1.3, March 2024: Updated SolarEdge Home Battery 400V - Only 1 battery per inverter Version 1.2, November 2023 This matrix displays the compatibility between…