solaredge.com SolarEdge Home Load Controller Model: DCS Optimize energy consumption by controlling appliance usage Controls permanently connected appliances Includes two controlled dry contact switches Switches larger single and three phase loads via an external contactor Wireless connection to the inverter via SolarEdge Home Network Increases savings by maximizing self-consumption through…
ELECTRICAL SHOCK HAZARD What’s in the packageN DE NL Mounting optionsE DE N IT E 2 Cabling N Datasheet Training EN System Requirements and Safety InformationF I E 1 Choose one of the options below IMPORTANT: Installation is allowed at up to 2000m of altitude. Choose one of two options below Safety Information • For indoor use only • Keep children away from the device • DO NOT use with medical or…
1 HANDLING AND SAFETY INSTRUCTIONS Version 1.3, April 2020 Safety Information WARNING! Denotes a hazard. It calls attention to a procedure that, if not correctly performed or adhered to, could result in injury or loss of life. Do not proceed beyond a warning note until the indicated conditions are fully understood and met. CAUTION! Denotes a hazard. It calls attention to a procedure that, if not…
Communication Board Replacement in Single Phase Inverters with HD-Wave Technology and SetApp Kit Contents Communication board Required Tools 4mm hex key Phillips screwdriver 3mm flat screwdriver Removing the Inverter Cover If the inverter cover is not already removed, use the following procedure for cover removal. To remove the inverter cover 1. Turn the inverter ON/OFF/P switch to OFF. Wait 5…
Version 1.0, June 2021 1 Application Note – Importing DXF Files into SolarEdge Designer Application Note – Site Groups in Monitoring Version History Version 1.0, October 2022 – first issue Contents Application Note – Site Groups in Monitoring…
Version 1.3, February 2024 Configure and Operate Load Control Devices 1 Configure and Operate Load Control Devices — Application Note This application note describes how to configure load control devices and the available operating modes for your customers. Revision history Version 1.3, February 2024: Latest Firmware version — 4.20. Home Network and Zigbee are now compatible Version 1.2, November…