solaredge.com
Three Phase Inverters
for the 120/208V Grid
For North America
SE10KUS / SE17.3KUS
The best choice for SolarEdge enabled systems
Specifically designed to work with…
Application Note - Negative Power Values Displayed in SetApp
If you have a StorEdge system installed, a negative power value may be displayed in the SetApp application, in the Status screen.
For example:
This only happens when your StorEdge inverter charges the battery from the AC grid, and not from PV modules…
Communication Board - Technical Specifications
Power
Input voltage 5 Vdc
Connector type Micro-fit
Power consumption <3 W
Operating temperature -40°C – 105 °C
Communication interfaces
RS485 interfaces 2 ports
Ethernet interface 10/100-BaseT
Wi-Fi interface 802.11b/802.11g/802.11n
ZigBee interface O-QSPK
Power reducer 4/6 pin…
www.solaredge.com
Wi-Fi Plug-in
SE1000-WIFI01
CO
M
M
U
N
IC
AT
IO
N
Simple Wireless Connectivity
Connects SolarEdge inverters wirelessly to a Wi-Fi router
Wi-Fi plug-in installed within the…
1
Application Note - SolarEdge Three Phase Home Backup Interface Commissioning
With SetApp Version 2.xx
Version History
• Version 2 (July 2023) – Change in Figure 1
• Version 1 (June 2023) - Initial release
Introduction
The SolarEdge Home Backup solution…
Application Note - Wi-Fi Password Configuration
You can configure Wi-Fi communication using one of the following methods:
l WPS (Wi-Fi Protected Setup) - a feature built into modern broadband routers which allows pairing of devices without
the need for password entry. If the network uses a router withoutWPS,…
ナレッジセンター