1 Application Note - SolarEdge Three Phase Home Backup Interface Commissioning With SetApp Version 2.xx Version History • Version 2 (July 2023) – Change in Figure 1 • Version 1 (June 2023) - Initial release Introduction The SolarEdge Home Backup solution provides backup power during grid outages. When a power outage occurs, the SolarEdge Backup Interface, Three Phase (BUI) detects the grid…
Installation Guide Communication Options Version 1.4 Version 1.4 November 2023 1 Revision History Version 1.4 (November 2023) Removed regions (heading- Chapter 5) Version 1.2 (February 2018) Changed SolarEdge Logger to Non-SolarEdge Logger in figure 'multiple inverters, RS485 bus, RS485-E, wired Ethernet (LAN) , non SE logger and modified procedure in SE Inverters Configuration after the…
SolarEdge Home Network OK OFF AC OFF ENET-HBNP-01 ENET-HBPV3D-01 ENET-HBPJD-01 ENET-HBCL-01 1 2 3 4 5 6 5MIN 1. Install the Antenna Turn off the inverter ON/OFF/P switch and DC safety switch (if applicable). SolarEdge Home Network Plug-in Installation 1 2 1 12 2 2. Install and Connect the Plug-in (may require communication board replacement) 4 ` 3 To avoid electric shock, refer to safety…
1 MAN-01-00137-1.9 ZigBee/Wi-Fi Antenna Installation NOTE For maximum range, make sure to position the antenna upright. NOTE This option is only applicable for StorEdge Single Phase Inverters. 1.8” / 45 mm ZigBee/Wi-Fi Antenna Installation Kit Contents Antenna with the attached clip and cable Safety Information Please review the following safety guidelines, and observe them when handling the…