Technical note Security updates for SolarEdge products Version 1.2 January 2025 Revision history Revision Date Description Version 1.2 January 2025 Added SE ONE Controller for Residential Version 1.1 June 2024 Added SolarEdge ONE Controller for C&I Version 1.0 March 2024 Initial release Overview As part of our continued commitment to deliver secure solutions, SolarEdge releases firmware and…
1 MAN-01-00735-1.0 - RS485 over RF Module - Technical Specifications RS485 over RF Module - Technical Specifications GENERAL Part Number SEPS-WT-XBEE Description Stand-alone RF modems provide reliable wireless connectivity over a range of up to 28 miles.* PERFORMANCE UNIT Indoor/Urban range 10 Kbps: up to 2000 ft. (610 m); 200 Kbps: up to 1000 ft. (305 m) ft./m Outdoor/RF line-of-sight range 10…
HD-Wave CT (CT) SECT-SPL-225A-T-20 5 333 mVac CT 全てのソーラーエッジ製エナジーメータに使用可能 solaredge.jp 99 (CT) SECT-SPL-225A-T-20 SECT-SPL-225A-T-20 ( 1% - 100%) ±1 % CT位相角(定格電流の10％-100%) < ±2.0 60/50 Hz 225 (@ 600 Vac) A 0 - 333 mVac CAT III 600V 150 mm2 300 A (H x W x L) 47 x 12.5 x 99 mm (W x L) 24 x 21.2 mm MTW UL1015 5.2 m 18 AWG 213 g -40～60 °C 5～90 IP IP30 RoHS * mm表記 SolarEdge Technologies Ltd.…
1 RS485 Surge Protection Kit Installation Guide - MAN-01-00597-1.1 Dual-Channel RS485 Surge Protection Device Plug-in for Three Phase Inverters with SetApp Configuration - Installation Guide This document describes how to install the RS485 Dual-Channel Surge Protection Device (SPD) in a SolarEdge three-phase inverter. For more information on the surge protection device, see the datasheet at:…
Environmental Sensors SE1000-SEN-IRR-S1, SE1000-SEN-TAMB-S2 SE1000-SEN-TMOD-S2, SE1000-SEN-WIND-S1 Irradiance sensor Ambient Temperature sensor Module Temperature sensor Wind Velocity sensor Environmental Monitoring of your SolarEdge System Connect environmental sensors to the SolarEdge Control and Communication Gateway for monitoring of your site Used to calculate site performance ratio…
Installation of DC Surge Protection Device in Three Phase Inverters This document describes how to install the DC Surge Protection Device (SPD) in a Three Phase Inverter. Kit Contents 5 DC SPD boards 5 bags with installation parts - each bag for single Installation Required Tools 5 mm hex key Torque Phillips screwdriver 3 mm flat screwdriver 3 mm torque socket driver wrench (long and narrow…
Centre d'information