Version 1.1, January 2023 1 MAN-01-00826-1.1 DC Surge Protection Device Installation/Replacement in Three Phase Inverters with Synergy Technology DC Surge Protection Device Installation/Replacement in Three Phase Inverters with Synergy Technology P/N: SExxK-xxxxIxxxx NOTE There are two types of DC Surge Protection Device (SPD) mounting systems for Synergy Manager, Horizontal and Vertical mounting…
Replacement of Low Power DC Panel in Three Phase Inverters with Synergy Technology This guide explains how to replace the Low Power DC Panel in the Three Phase Inverter with Synergy Technology. Revision History Version 1.0 (November. 2021) Kit Contents Replacement DC Panel Required Tools 4 mm Allen torque wrench Torque Phillips screwdriver 3 mm flat head screwdriver Removing the Synergy Manager…
Replacement of High Power DC Panel in Three Phase Inverters with Synergy Technology This guide explains how to replace the High Power DC Panel in the Three Phase Inverter with Synergy Technology. Revision History Version 1.0 (October. 2021) Kit Contents Replacement DC Panel Required Tools 4 mm Allen torque wrench Torque Phillips screwdriver 3 mm flat head screwdriver Removing the Synergy Manager…
Replacement of ON/OFF/P Switch in Three Phase Inverters with Synergy Technology This guide explains how to replace the ON/OFF/P Switch in the Three Phase Inverter with Synergy Technology. Revision History Version 1.0 (September. 2021) Kit Contents ON/OFF/P switch with cables Switch nut Gasket Switch nut socket Required Tools 4 mm Allen torque wrench Socket torque wrench Phillips screwdriver 3 mm…
Replacement of Corrugated Conduit in Three Phase Inverter with Synergy Technology This manual describes how to replace a Corrugated Conduit in Three Phase Inverter with Synergy Technology. Figure 1: Corrugated Conduit in Three Phase Inverter with Synergy Technology Kit Contents Corrugated Conduit for right / left Synergy Unit Corrugated Conduit for center Synergy Unit Required Tools 3 mm flat-…
ON/OFF/P Switch Replacement in Energy Hub Inverters Kit Contents ON/OFF/P switch with cables Mounting nut Gasket Plastic tie Required Tools 4mm Allen key Knife Pliers Removing the Inverter and Connection Unit Covers 1. Turn off the ON/OFF/P switch. Wait 5 minutes. 2. Turn off the DC switch on the Connection Unit. 3. Turn off AC to the inverter on the main distribution panel. 4. Release the Allen…