solaredge.com SolarEdge Home Network Wireless Mesh Network One communication platform for seamless device connection within the SolarEdge Smart Energy Management ecosystem Faster, easier, and cleaner installations* Avoids the hassle of wired infrastructure with wireless connectivity between inverter and system devices Simple plug and play connection Automatic device detection and configuration…
1 MAN-01-00735-1.0 - RS485 over RF Module - Technical Specifications RS485 over RF Module - Technical Specifications GENERAL Part Number SEPS-WT-XBEE Description Stand-alone RF modems provide reliable wireless connectivity over a range of up to 28 miles.* PERFORMANCE UNIT Indoor/Urban range 10 Kbps: up to 2000 ft. (610 m); 200 Kbps: up to 1000 ft. (305 m) ft./m Outdoor/RF line-of-sight range 10…
solaredge.com SolarEdge Home Load Controller Model: DCS Optimize energy consumption by controlling appliance usage Controls permanently connected appliances Includes two controlled dry contact switches Switches larger single and three phase loads via an external contactor Wireless connection to the inverter via SolarEdge Home Network Increases savings by maximizing self-consumption through…
1 Communication Board Replacement in Three Phase Inverters Kit Contents Communication board Required Tools 5mm hex key Torque Philips screwdriver 3mm flat screwdriver Removing the Inverter Cover If the inverter cover is not already removed, use the following procedure for cover removal. To remove the inverter cover 1. Turn the inverter ON/OFF/P switch to OFF. Wait 5 minutes for the capacitors to…
Installation of AC Surge Protection Device in Three Phase Inverters This document describes how to install the AC Surge Protection Device (SPD) in a Three Phase Inverter. Kit Contents 5 AC SPD boards 5 bags with installation parts. Each bag for single Installation in inverter with terminal block support (see Figure 1) 5 bags with installation parts. Each bag for single installation in inverter…
Installation Guide Communication Options Version 1.4 Version 1.4 November 2023 1 Revision History Version 1.4 (November 2023) Removed regions (heading- Chapter 5) Version 1.2 (February 2018) Changed SolarEdge Logger to Non-SolarEdge Logger in figure 'multiple inverters, RS485 bus, RS485-E, wired Ethernet (LAN) , non SE logger and modified procedure in SE Inverters Configuration after the…