Version 1.3, February 2024 Configure and Operate Load Control Devices 1 Configure and Operate Load Control Devices — Application Note This application note describes how to configure load control devices and the available operating modes for your customers. Revision history Version 1.3, February 2024: Latest Firmware version — 4.20. Home Network and Zigbee are now compatible Version 1.2, November…
Version 1.5, May 2022 1 Application Note - SolarEdge Inverter - Alternative Power Source Version History Version 1.5 (May 2022) – add note - Disabled external control functions in Alternative Power Source mode Version 1.4 (March 2020) – Update of the minimum supported CPU version for three phase inverters to 4.8.xxx Version 1.3 (January 2020) – Addition of dry/wet contacts connection diagrams…
1 Application Note - SolarEdge Three Phase Home Backup Interface Commissioning With SetApp Version 2.xx Version History • Version 2 (July 2023) – Change in Figure 1 • Version 1 (June 2023) - Initial release Introduction The SolarEdge Home Backup solution provides backup power during grid outages. When a power outage occurs, the SolarEdge Backup Interface, Three Phase (BUI) detects the grid…
Version 1.1, April 2022 1 Technical Note - SolarEdge Home Network Plug-in Kit Selection Technical Note - SolarEdge Home Network Plug-in Kit Selection Refer to the table below to select the appropriate SolarEdge Home Network Plug-in kit for your inverter. For installation instructions, refer to the installation guide that comes with the kit. Inverter Inverter Part Number Inverter Cellular Socket…