1 MAN-01-00735-1.0 - RS485 over RF Module - Technical Specifications RS485 over RF Module - Technical Specifications GENERAL Part Number SEPS-WT-XBEE Description Stand-alone RF modems provide reliable wireless connectivity over a range of up to 28 miles.* PERFORMANCE UNIT Indoor/Urban range 10 Kbps: up to 2000 ft. (610 m); 200 Kbps: up to 1000 ft. (305 m) ft./m Outdoor/RF line-of-sight range 10…
Communication Board Replacement in Single Phase Inverters with HD-Wave Technology and SetApp Kit Contents Communication board Required Tools 4mm hex key Phillips screwdriver 3mm flat screwdriver Removing the Inverter Cover If the inverter cover is not already removed, use the following procedure for cover removal. To remove the inverter cover 1. Turn the inverter ON/OFF/P switch to OFF. Wait 5…
Technical Note SolarEdge Products Temperature Derating Version 1.7 March 2025 MAN-01-01250-1.0 About This Technical Note summarizes the derating properties of SolarEdge Inverters and Power Optimizers. Revision history Version Date Description 1.7 March 2025 Added graph for Three Phase Inverters for VDE4110 certification 1.6 January 2025 Added SE250KUS, SE285KUS, SE285K 1.5 June 2024 Added R500…
1 RS485 Surge Protection Kit Installation Guide - MAN-01-00597-1.1 Dual-Channel RS485 Surge Protection Device Plug-in for Three Phase Inverters with SetApp Configuration - Installation Guide This document describes how to install the RS485 Dual-Channel Surge Protection Device (SPD) in a SolarEdge three-phase inverter. For more information on the surge protection device, see the datasheet at:…
Installation of DC Surge Protection Device in Three Phase Inverters This document describes how to install the DC Surge Protection Device (SPD) in a Three Phase Inverter. Kit Contents 5 DC SPD boards 5 bags with installation parts - each bag for single Installation Required Tools 5 mm hex key Torque Phillips screwdriver 3 mm flat screwdriver 3 mm torque socket driver wrench (long and narrow…
AC Surge Protection Device Installation / Replacement in Three Phase Inverters with Synergy Technology P/N: SExxK-xxxxlxxxx This document describes how to install or replace the AC Surge Protection Device (SPD) in a three phase inverter with Synergy technology. Kit Contents Five AC SPD Boards Spare screws Required Tools Torque 4mm hex screwdriver Torque Phillips screwdriver Torque ratchet wrench…
知識中心