Technical note Security updates for SolarEdge products Version 1.2 January 2025 Revision history Revision Date Description Version 1.2 January 2025 Added SE ONE Controller for Residential Version 1.1 June 2024 Added SolarEdge ONE Controller for C&I Version 1.0 March 2024 Initial release Overview As part of our continued commitment to deliver secure solutions, SolarEdge releases firmware and…
1 MAN-01-00735-1.0 - RS485 over RF Module - Technical Specifications RS485 over RF Module - Technical Specifications GENERAL Part Number SEPS-WT-XBEE Description Stand-alone RF modems provide reliable wireless connectivity over a range of up to 28 miles.* PERFORMANCE UNIT Indoor/Urban range 10 Kbps: up to 2000 ft. (610 m); 200 Kbps: up to 1000 ft. (305 m) ft./m Outdoor/RF line-of-sight range 10…
Communication Board Replacement in Single Phase Inverters with HD-Wave Technology and SetApp Kit Contents Communication board Required Tools 4mm hex key Phillips screwdriver 3mm flat screwdriver Removing the Inverter Cover If the inverter cover is not already removed, use the following procedure for cover removal. To remove the inverter cover 1. Turn the inverter ON/OFF/P switch to OFF. Wait 5…
Technical Note SolarEdge Products Temperature Derating Version 1.7 March 2025 MAN-01-01250-1.0 About This Technical Note summarizes the derating properties of SolarEdge Inverters and Power Optimizers. Revision history Version Date Description 1.7 March 2025 Added graph for Three Phase Inverters for VDE4110 certification 1.6 January 2025 Added SE250KUS, SE285KUS, SE285K 1.5 June 2024 Added R500…
1 RS485 Surge Protection Kit Installation Guide - MAN-01-00597-1.1 Dual-Channel RS485 Surge Protection Device Plug-in for Three Phase Inverters with SetApp Configuration - Installation Guide This document describes how to install the RS485 Dual-Channel Surge Protection Device (SPD) in a SolarEdge three-phase inverter. For more information on the surge protection device, see the datasheet at:…
Environmental Sensors SE1000-SEN-IRR-S1, SE1000-SEN-TAMB-S2 SE1000-SEN-TMOD-S2, SE1000-SEN-WIND-S1 Irradiance sensor Ambient Temperature sensor Module Temperature sensor Wind Velocity sensor Environmental Monitoring of your SolarEdge System Connect environmental sensors to the SolarEdge Control and Communication Gateway for monitoring of your site Used to calculate site performance ratio…
知識中心