Version 1.0, Sep. 2019 1 Application note: Identification of Inverter Manufacturing Date Version History Version 1.0 (Sep. 2019) – Initial release This document describs how to identify the manufacturing date of SolarEdge inverters. This document relates to SolarEdge inverter series: Single phase inverters with compact technology Single phase inverters with HD-Wave technology Three phase…
Application Note - Wi-Fi Configuration Using SetApp Version history Version 1.0, May 2019 - Initial release Introduction This application note describes how to set up Wi-Fi connection between the inverter and the customer’s network using the SetApp mobile application. You can configure Wi-Fi communication using one of the following methods: Connecting to the customer's Wi-Fi network with a…
Installation of AC Surge Protection Device in Three Phase Inverters This document describes how to install the AC Surge Protection Device (SPD) in a Three Phase Inverter. Kit Contents 5 AC SPD boards 5 bags with installation parts. Each bag for single Installation in inverter with terminal block support (see Figure 1) 5 bags with installation parts. Each bag for single installation in inverter…
Temperature Sensor Kit Installation This document describes how to install a SolarEdge PT100 temperature sensor and connect it to the residential water heater and to the SolarEdge Smart Energy Hot Water device. The sensor allows you to measure the water temperature in the water heater. After installing the sensor, you will be able to view the temperature using SolarEdge monitoring platform.…
Application Note - Horizontal Mounting of Three Phase Inverters Revision History Version 1.3, Nov. 2020 - Addition of inverter models SE17.3KUS and SE40KUS in North America Introduction SolarEdge three phase inverters can be installed horizontally (above 10° tilt) as well as vertically, and at any tilt over 10° up to 90°. Horizontally mounted inverters can be installed under or near the modules,…