Revision 1.0, November 2020 1 Application Note–Backup Interface Installation Best Practices Application Note–Backup Interface Installation Best Practices Revision History Revision 1.0 - November 2020 Initial release Introduction SolarEdge’s Backup Interface is designed to create a microgrid during power outages by disconnecting the home from the grid. This application note provides information…
Application Note Battery and SolarEdge Home Hub Inverter Compatibility Version 2.2 February 2025 Revision History Version Date Description 2.2 February 2025 Fixed compatibility for two PNs: SE3800H-USSMBBL14SE7600H-USSMBBL14 Added new PN to the table: SE7600H-USS00BNN 2.1 September 2024 Added inverter models to the Home Hub Cellular and PCS. Added inverter PN: SE5700H-USMNFBL75 to the Home Hub…
Version 1.0, 23 June 2022 1 Multiwire Branch Circuit (MWBC) and Shared Neutrals in Backup Systems - Application Note Multiwire Branch Circuit (MWBC) and Shared Neutrals in Backup Systems - Application Note Contents MWBC and Simultaneous Disconnect…
page 1 of 2 Kiwa Primara GmbH Gewerbestraße 28 87600 Kaufbeuren Germany Tel. +49 8341 99726-0 primara@kiwa.com www.kiwa.de Declaration of Compliance Applicant: SolarEdge Technologies LTD 1 HaMada Street 4673335 Herzeliya Israel Product type: Backup Interface (BI) Model: BI-AU1P Rating: See page 2 A representative test sample of above stated model passed the tests according to: Standard: IEC 62109…
HERMON Laboratories Ltd. 66 Ha-tahana St P.O 23, Binyamina 3055001 Israel Tel: 972-4-6268001 www.hermonlabs.com Doc Identity Certificate of Compliance Date of Issue 22/1229 01/02/2022 Product: BACKUP INTERFACE Model: BI-AU1P Test Date: 29/12/2021 This is to certify that the product specified herein has been tested and found compliant with the requirements of IEC 60529 (2001) Degree of protection…
SolarEdge Home Backup Interface, Three Phase BI-EU3P for use with the SolarEdge Home Hub Inverter Three Phase Quick Installation Guide 21 Mounting the Backup Interface 1. Select an installation location. Make sure you have enough space between the Backup Interface and other objects to securely access all its interfaces. 2. Install the mounting bracket to the wall and secure it with 2-4 screws. If…
Knowledge Center