Version 1.3, June 2021 1 Meeting Hawaii Utility Interconnect Requirements Version History Version 1.3 – June 2021 – Added new three phase inverter model numbers under Appendix A Version 1.2 – May 2019 – Added three phase inverter model numbers; and DSP2 version; and SetApp inverter requirements; removed non-installer related information Version 1.1 – Dec. 2018 – Updated HPUC Member Website Links…
Revision 1.0, November 2020 1 Application Note–Backup Interface Installation Best Practices Application Note–Backup Interface Installation Best Practices Revision History Revision 1.0 - November 2020 Initial release Introduction SolarEdge’s Backup Interface is designed to create a microgrid during power outages by disconnecting the home from the grid. This application note provides information…
Replacing a Single Phase HD-Wave Inverter This installation guide describes the procedures for replacing a Single Phase HD-Wave Inverter. Kit Contents Spacer for adjusting the Safety Switch wall bracket Required Tools 4mm hex key Phillips screwdriver 3mm (small) Flat screwdriver Removing the Inverter Cover Use the following procedure to remove the inverter cover. To remove the inverter cover 1.…
Technical Note Connecting the Home Hub Inverter to Multiple Home Batteries – North America Version 1.1 March 2025 Table of Contents Version History ......................................................................................................................... 3 Overview…
Version 1.0, May 2018 1 ISO New England (ISO-NE) Configuration Instructions Version History Version 1.0 – May 2018 – Initial release Introduction This instruction is provided to meet the Inverter Source Requirement Document as published by ISO New England (ISO-NE) in February of 2018. All SolarEdge inverter products produced after work week 14 of 2017 can be programmed appropriately and have…
Knowledge Center