solaredge.com SolarEdge Home Network Wireless Mesh Network One communication platform for seamless device connection within the SolarEdge Smart Energy Management ecosystem Faster, easier, and cleaner installations* Avoids the hassle of wired infrastructure with wireless connectivity between inverter and system devices Simple plug and play connection Automatic device detection and configuration…
1 HANDLING AND SAFETY INSTRUCTIONS Version 1.3, April 2020 Safety Information WARNING! Denotes a hazard. It calls attention to a procedure that, if not correctly performed or adhered to, could result in injury or loss of life. Do not proceed beyond a warning note until the indicated conditions are fully understood and met. CAUTION! Denotes a hazard. It calls attention to a procedure that, if not…
Communication Board Replacement in Single Phase Inverters with HD-Wave Technology and SetApp Kit Contents Communication board Required Tools 4mm hex key Phillips screwdriver 3mm flat screwdriver Removing the Inverter Cover If the inverter cover is not already removed, use the following procedure for cover removal. To remove the inverter cover 1. Turn the inverter ON/OFF/P switch to OFF. Wait 5…
Technical Note SolarEdge Products Temperature Derating Version 1.8 June 2025 MAN-01-01250-1.0 Table Of Contents About ......................................................................................................................................... 3 Revision history ......................................................................................................................... 3…
SolarEdge Technologies | www.solaredge.com USA | Germany | UK | Italy | Benelux | Japan | China | Australia Israel | India | France | Turkey | Korea | Sweden | Bulgaria UK Declaration of Conformity This is to declare that the products listed below including their required accessories have been manufactured according to the following UK directives: Electrical Equipment (Safety) Regulations 2016…
Version 1.4 August 2024 SolarEdge Home Network Plug-in Installation Model: ENET 1 The installation of the SolarEdge Home Network Plug-in must be performed by a qualified installer only. Make sure to follow all safety and handling instructions specified in the inverter installation guide. 1. Install the Antenna 2. Install and Connect the Plug-in (may require communication board replacement) 3.…
Knowledge Center