Version 1.3, June 2021 1 Meeting Hawaii Utility Interconnect Requirements Version History Version 1.3 – June 2021 – Added new three phase inverter model numbers under Appendix A Version 1.2 – May 2019 – Added three phase inverter model numbers; and DSP2 version; and SetApp inverter requirements; removed non-installer related information Version 1.1 – Dec. 2018 – Updated HPUC Member Website Links…
Application Note: Determining Power Optimizer and PV Module Compatibility based on Isc STC As of May 2020, compatibility between power optimizers and PV modules is determined based on the Isc STC value, instead of the Isc temperature coefficient of the module. This ensures that a greater range of power optimizers are compatible with various PV modules. In the example below, the PVmodule's…
Versie 1.0, Mei 2020 1 Technische notitie: Bepalen van de Power Optimizer en PV- module compatibiliteit op basis van de Isc STC Vanaf mei 2020 wordt de compatibiliteit tussen Power Optimizers en PV-modules bepaald op basis van de Isc STC-waarde, in plaats van de Isc-temperatuurcoëfficiënt van de module. Dit zorgt ervoor dat een groter bereik aan Power Optimizers compatibel is met verschillende PV…
Replacing a Single Phase HD-Wave Inverter This installation guide describes the procedures for replacing a Single Phase HD-Wave Inverter. Kit Contents Spacer for adjusting the Safety Switch wall bracket Required Tools 4mm hex key Phillips screwdriver 3mm (small) Flat screwdriver Removing the Inverter Cover Use the following procedure to remove the inverter cover. To remove the inverter cover 1.…
Technical Note Connecting the Home Hub Inverter to Multiple Home Batteries – North America Version 1.1 March 2025 Table of Contents Version History ......................................................................................................................... 3 Overview…
Kunskapscenter