1 MAN-01-00734-1.0 - Site Power Controller - Technical Specifications Site Power Controller - Technical Specifications Part Number SE2000-PFSV-MSDC Description Site power controller provides dynamic control of site power, active power & reactive power Inputs / Outputs UNIT AI 4 independent analog input channels (can be configured as voltage or current input) DI / DO 8 digital inputs / 8…
1 MAN-01-00735-1.0 - RS485 over RF Module - Technical Specifications RS485 over RF Module - Technical Specifications GENERAL Part Number SEPS-WT-XBEE Description Stand-alone RF modems provide reliable wireless connectivity over a range of up to 28 miles.* PERFORMANCE UNIT Indoor/Urban range 10 Kbps: up to 2000 ft. (610 m); 200 Kbps: up to 1000 ft. (305 m) ft./m Outdoor/RF line-of-sight range 10…
A Energy Meter with Modbus Connection Quick Installation Guide WARNING – WARNUNG – WAARSCHUWING – AVERTISSEMENT – AVVERTENZA - OSTRZEŻENIE • DISCONNECT GRID POWER BEFORE BEGINNING INSTALLATION • SCHALTEN SIE DEN AC-STROM AUS, BEVOR SIE DIE STROMWANDLER ANKLEMMEN • SCHAKEL DE NETSTROOM UIT VOORDAT U MET DE INSTALLATIE BEGINT • DÉBRANCHEZ L'ALIMENTATION DU RÉSEAU AVANT DE COMMENCER L'…
1 HANDLING AND SAFETY INSTRUCTIONS Version 1.3, April 2020 Safety Information WARNING! Denotes a hazard. It calls attention to a procedure that, if not correctly performed or adhered to, could result in injury or loss of life. Do not proceed beyond a warning note until the indicated conditions are fully understood and met. CAUTION! Denotes a hazard. It calls attention to a procedure that, if not…
Communication Board Replacement in Single Phase Inverters with HD-Wave Technology and SetApp Kit Contents Communication board Required Tools 4mm hex key Phillips screwdriver 3mm flat screwdriver Removing the Inverter Cover If the inverter cover is not already removed, use the following procedure for cover removal. To remove the inverter cover 1. Turn the inverter ON/OFF/P switch to OFF. Wait 5…
Kunskapscenter