1 SolarEdge Offering SetApp Enabled P/N Equivalency List Contact your local SolarEdge distributor for more information Old Part Number for inverters with a display Equivalent Part Number for inverters with SetApp configuration Product Description Residential: Single Phase Inverters with HD-Wave Technology SE3000H-US000NNU2 SE3000H-US000BNU4 Single Phase Inverter with HD-Wave Technology, 3.0kW, (-…
Version 1.0 SolarEdge Built-in Revenue Grade Meter Troubleshooting Contents Troubleshooting Meter Connection 3 Communication Status Screen Troubleshooting 3 Device Type and Protocol are configured incorrectly 3 Number of devices is not displayed 3 Meter Status Screen Troubleshooting 4 is not displayed 4 An error message is displayed 4 Total [Wh] value is not advancing 4 Replacing the…
Replacing a Single Phase HD-Wave Inverter This installation guide describes the procedures for replacing a Single Phase HD-Wave Inverter. Kit Contents Spacer for adjusting the Safety Switch wall bracket Required Tools 4mm hex key Phillips screwdriver 3mm (small) Flat screwdriver Removing the Inverter Cover Use the following procedure to remove the inverter cover. To remove the inverter cover 1.…
Revision 1.0, November 2020 1 Application Note–Backup Interface Installation Best Practices Application Note–Backup Interface Installation Best Practices Revision History Revision 1.0 - November 2020 Initial release Introduction SolarEdge’s Backup Interface is designed to create a microgrid during power outages by disconnecting the home from the grid. This application note provides information…
Version 1.0, July-2020 1 Application Note – Setting the PCS ESS Export Only Mode Application Note – Setting the PCS ESS Export Only Mode Version History Version 1.0, July 2020 – first version Introduction UL 1741 Power Control Systems (PCS) is a section in the UL 1741 standard that defines the methodology for testing electronic current. PCS describes how to test and report export limitation…
Version 1.6, Mar 2019 1 SolarEdge Instruction - California Electric Rule 21 Version History Version 1.6, March 2019: Rule 21 phase 3 adaptation Version 1.5, Aug 2018: Simplified inverter configuration instructions to meet requirements Introduction Electric Rule 21 describes the interconnection, operating and metering requirements for generation facilities to be connected to the public utilities‘…