September 2015 1 Connecting the Inverter Using Wi-Fi – for Installers NOTE For full installation and safety details, refer to the SolarEdge Installation Guide. Make sure you read, fully understand and follow the detailed instructions in it prior to each installation or service procedure. Failure to do so may result in injury or loss of life and damage to the equipment. This quick guide describes…
EV Charging Inverter Activation & Cable Installation Guide This guide will help you install your EV Charger cable, activate your EV Charging Inverter and configure it to fit your needs Package Contents Required Equipment EV Charger cable 4 screws Wall-mounted holder (screws not included) Screwdriver Cable lock & installation guide Drill Lock cable Disassemble CONNECTING & HANGING Make…
SolarEdge EV Charger Quick Installation Guide D1 Wiring the AC To see the latest Interactive Installation Guide, use SetApp to scan the QR code on your EV Charger Cut the connection wires to the appropriate length. The PE conductor must be longer than the other conductors. Push the screwdriver straight into the terminal and push down until the contact opens completely. Insert the wire into the…
Drill 3-5 screws 3-5 wall anchors Faster charging comes home SolarEdge Home EV Charger Quick installation guide for AustraliaShort press LED ring indications Color Description OFF No power Red ON Error Green ON Charging and connected to the internet Orange ON Charging. Not connected to the internet. Orange blinking Connected to the EV. Not connected to the internet. Purple blinking fast EV…
Three Phase Inverter with Synergy Technology For Australia Version 1.3 Quick Installation Guide PN: SEKxx-AUxxIxxxx Scan for full installation guide Legend NOTE This symbol denotes information intended to assist the user in making optimum use of the product. CAUTION! Denotes a hazard. It calls attention to a procedure that, if not correctly performed or adhered to, could result in damage or…
For Australia Version 1.1 Three Phase Inverter with SetApp Configuration PN: SEXXK-AUXXIXXXX Quick Installation Guide 1. Turn ON/OFF/P Switch to OFF (0) 2. Turn Safety Switch to OFF 3. Open cover screws Fasten screws in described order NOTE Turn ON/OFF the main circuit board AC switch, and wait 5 minutes Torque value LEDs Legend Do not cut cable connectors Inverter ON/OFF Switch: 0=OFF; 1=ON; P=…