solaredge.com SolarEdge Home Network Wireless Mesh Network One communication platform for seamless device connection within the SolarEdge Smart Energy Management ecosystem Faster, easier, and cleaner installations* Avoids the hassle of wired infrastructure with wireless connectivity between inverter and system devices Simple plug and play connection Automatic device detection and configuration…
Temperature Sensor Kit Installation This document describes how to install a SolarEdge PT100 temperature sensor and connect it to the residential water heater and to the SolarEdge Smart Energy Hot Water device. The sensor allows you to measure the water temperature in the water heater. After installing the sensor, you will be able to view the temperature using SolarEdge monitoring platform.…
Installation Guide Communication Options Version 1.4 Version 1.4 November 2023 1 Revision History Version 1.4 (November 2023) Removed regions (heading- Chapter 5) Version 1.2 (February 2018) Changed SolarEdge Logger to Non-SolarEdge Logger in figure 'multiple inverters, RS485 bus, RS485-E, wired Ethernet (LAN) , non SE logger and modified procedure in SE Inverters Configuration after the…
Environmental Sensors SE1000-SEN-IRR-S1, SE1000-SEN-TAMB-S2 SE1000-SEN-TMOD-S2, SE1000-SEN-WIND-S1 Irradiance sensor Ambient Temperature sensor Module Temperature sensor Wind Velocity sensor Environmental Monitoring of your SolarEdge System Connect environmental sensors to the SolarEdge Control and Communication Gateway for monitoring of your site Used to calculate site performance ratio…
Version 1.2, July 2024 SolarEdge Home Network Plug-in Kit Selection 1 SolarEdge Home Network Plug-in Kit Selection — Technical Note Revision history Version 1.2, July 2024: Updated the SolarEdge Home Network Plug-in Kit Selection for Three Phase Inverter with SetApp and StorEdge Three Phase Inverter. Added to the Inverters and Compatible Home Network Plug-in Kits table a SolarEdge Home Short…
Version 1.4 August 2024 SolarEdge Home Network Plug-in Installation Model: ENET 1 The installation of the SolarEdge Home Network Plug-in must be performed by a qualified installer only. Make sure to follow all safety and handling instructions specified in the inverter installation guide. 1. Install the Antenna 2. Install and Connect the Plug-in (may require communication board replacement) 3.…
Centrum Wiedzy