ON/OFF/P Switch Replacement in Energy Hub Inverters Kit Contents ON/OFF/P switch with cables Mounting nut Gasket Plastic tie Required Tools 4mm Allen key Knife Pliers Removing the Inverter and Connection Unit Covers 1. Turn off the ON/OFF/P switch. Wait 5 minutes. 2. Turn off the DC switch on the Connection Unit. 3. Turn off AC to the inverter on the main distribution panel. 4. Release the Allen…
Installation Guide Communication Options Version 1.4 Version 1.4 November 2023 1 Revision History Version 1.4 (November 2023) Removed regions (heading- Chapter 5) Version 1.2 (February 2018) Changed SolarEdge Logger to Non-SolarEdge Logger in figure 'multiple inverters, RS485 bus, RS485-E, wired Ethernet (LAN) , non SE logger and modified procedure in SE Inverters Configuration after the…
Version 1.4 August 2024 SolarEdge Home Network Plug-in Installation Model: ENET 1 The installation of the SolarEdge Home Network Plug-in must be performed by a qualified installer only. Make sure to follow all safety and handling instructions specified in the inverter installation guide. 1. Install the Antenna 2. Install and Connect the Plug-in (may require communication board replacement) 3.…