`1 2 B. Install the circuit breaker 3 OFF Main Service Panel 1 5 OFF 2 Main breaker switch applicable for BI-E only OFF 3 17 in*lbs 23 in*lbs 6 A. Power off the system and open the Backup Interface Inverter Circuit Breaker Installation for connecting an additional inverter to the Backup Interface (BI-N and BI-E models) ELECTRICAL SHOCK HAZARD C. Mount the dead front D. Connect an additional…
Backup Interface Installation Checklist 1. Installation and Wiring at the Backup Interface 1.1 Check the torque of all the securing bolts for the mounting bracket and conduit holder. ◻ 1.2 Check the torque of all the electrical connections inside the Backup Interface ◻ 1.3 Take a photograph of the Backup Interface connection area (useful for future debugging, if necessary). ◻ 1.4 If required,…
Application Note Battery and SolarEdge Home Hub Inverter Compatibility Version 2.2 February 2025 Revision History Version Date Description 2.2 February 2025 Fixed compatibility for two PNs: SE3800H-USSMBBL14SE7600H-USSMBBL14 Added new PN to the table: SE7600H-USS00BNN 2.1 September 2024 Added inverter models to the Home Hub Cellular and PCS. Added inverter PN: SE5700H-USMNFBL75 to the Home Hub…
Version 1.0, 23 June 2022 1 Multiwire Branch Circuit (MWBC) and Shared Neutrals in Backup Systems - Application Note Multiwire Branch Circuit (MWBC) and Shared Neutrals in Backup Systems - Application Note Contents MWBC and Simultaneous Disconnect…
Revision 1.0, November 2020 1 Application Note–Backup Interface Installation Best Practices Application Note–Backup Interface Installation Best Practices Revision History Revision 1.0 - November 2020 Initial release Introduction SolarEdge’s Backup Interface is designed to create a microgrid during power outages by disconnecting the home from the grid. This application note provides information…
Knowledge Center