Backup Interface Installation Checklist 1. Installation and Wiring at the Backup Interface 1.1 Check the torque of all the securing bolts for the mounting bracket and conduit holder. ◻ 1.2 Check the torque of all the electrical connections inside the Backup Interface ◻ 1.3 Take a photograph of the Backup Interface connection area (useful for future debugging, if necessary). ◻ 1.4 If required,…
`1 2 B. Install the circuit breaker 3 OFF Main Service Panel 1 5 OFF 2 Main breaker switch applicable for BI-E only OFF 3 17 in*lbs 23 in*lbs 6 A. Power off the system and open the Backup Interface Inverter Circuit Breaker Installation for connecting an additional inverter to the Backup Interface (BI-N and BI-E models) ELECTRICAL SHOCK HAZARD C. Mount the dead front D. Connect an additional…
Revision 1.0, November 2020 1 Application Note–Backup Interface Installation Best Practices Application Note–Backup Interface Installation Best Practices Revision History Revision 1.0 - November 2020 Initial release Introduction SolarEdge’s Backup Interface is designed to create a microgrid during power outages by disconnecting the home from the grid. This application note provides information…
Version 1.0, 23 June 2022 1 Multiwire Branch Circuit (MWBC) and Shared Neutrals in Backup Systems - Application Note Multiwire Branch Circuit (MWBC) and Shared Neutrals in Backup Systems - Application Note Contents MWBC and Simultaneous Disconnect…
Version 2.1, September 2024 Battery and SolarEdge Home Hub Inverter Compatibility 1 Battery and SolarEdge Home Hub Inverter Compatibility – Application Note Revision History Version 2.1, September 2024: Added inverter models to the Home Hub Cellular and PCS. Added inverter PN: SE5700H-USMNFBL75 to the Home Hub with Cellular and PCS for the Re-Energize Program. Version 2.0, June 2024: Added Home…