Application Note - Installing Frame-Mounted Power Optimizers Introduction Frame-mounted power optimizers are mounted directly on the module frame in rail-less racking systems. Mounting the power optimizers in advance saves installation time. You can mount the power optimizer at any point of the frame. The supported module frame cross-section is 1.1-2.2 mm/ 0.04-0.09 in. Figure 1: Frame Dimensions…
RS485 Surge Protection Kit Installation Guide This document describes how to install the RS485 Surge Protection Kit in a SolarEdge inverter. Kit Contents Surge protection board Figure 1: Surge Protection Board Installation Procedure 1. Turn the inverter ON/OFF switch to OFF. The inverter display should indicate that the string voltage is in the safety voltage range (< 50V). 2. Disconnect the…
1 MAN-01-00137-1.9 ZigBee/Wi-Fi Antenna Installation NOTE For maximum range, make sure to position the antenna upright. NOTE This option is only applicable for StorEdge Single Phase Inverters. 1.8” / 45 mm ZigBee/Wi-Fi Antenna Installation Kit Contents Antenna with the attached clip and cable Safety Information Please review the following safety guidelines, and observe them when handling the…