Temperature Sensor Kit Installation This document describes how to install a SolarEdge PT100 temperature sensor and connect it to the residential water heater and to the SolarEdge Smart Energy Hot Water device. The sensor allows you to measure the water temperature in the water heater. After installing the sensor, you will be able to view the temperature using SolarEdge monitoring platform.…
EU type-examination certificate (Module B) 242140215/AA/00 Issued 18 September 2024 Page 1 of 9 This certificate has THREE Annexes Kiwa Nederland B.V. Wilmersdorf 50 Postbus 137 7300 AC Apeldoorn The Netherlands https://www.kiwa.com/nl/en/markets/ radio-wireless-and-electrical- equipment/ Chamber of commerce 08090048 In compliance with the procedure specified in the Radio Equipment Directive…
Technical Note Replacement of External Fan Assembly in Three Phase Inverters Version 1.1 December 2024 MAN-01-00731-1.1 Revision history • Version Date Description 1.1 December 2024 Added a warning 1.0 Printed version Overview The Three Phase inverter has two fans: an internal and an external accessible fan, referred to as an external fan for the following part numbers. Name PN Three Phase…
Environmental Sensors SE1000-SEN-IRR-S1, SE1000-SEN-TAMB-S2 SE1000-SEN-TMOD-S2, SE1000-SEN-WIND-S1 Irradiance sensor Ambient Temperature sensor Module Temperature sensor Wind Velocity sensor Environmental Monitoring of your SolarEdge System Connect environmental sensors to the SolarEdge Control and Communication Gateway for monitoring of your site Used to calculate site performance ratio…
Application Note Third-Party Devices Supported by SolarEdge Version 1.2 April 2025 MAN-01-01260-1.2 Revision history Version Date Description Version 1.2 April 2025 Updated Silicon Irradiance Sensor section. Version 1.1 August 2024 Updated Janitza® UMG96-PA-MID+ Power Analyzer Overview This Application Note lists all third-party devices that are supported by SolarEdge inverters or Control and…
Knowledge Center