Version 1.3, February 2024 Configure and Operate Load Control Devices 1 Configure and Operate Load Control Devices — Application Note This application note describes how to configure load control devices and the available operating modes for your customers. Revision history Version 1.3, February 2024: Latest Firmware version — 4.20. Home Network and Zigbee are now compatible Version 1.2, November…
Version 1.1, April 2022 1 Technical Note - SolarEdge Home Network Plug-in Kit Selection Technical Note - SolarEdge Home Network Plug-in Kit Selection Refer to the table below to select the appropriate SolarEdge Home Network Plug-in kit for your inverter. For installation instructions, refer to the installation guide that comes with the kit. Inverter Inverter Part Number Inverter Cellular Socket…
1 Application Note - SolarEdge Three Phase Home Backup Interface Commissioning With SetApp Version 2.xx Version History • Version 2 (July 2023) – Change in Figure 1 • Version 1 (June 2023) - Initial release Introduction The SolarEdge Home Backup solution provides backup power during grid outages. When a power outage occurs, the SolarEdge Backup Interface, Three Phase (BUI) detects the grid…
Application Note - Wi-Fi Password Configuration You can configure Wi-Fi communication using one of the following methods: l WPS (Wi-Fi Protected Setup) - a feature built into modern broadband routers which allows pairing of devices without the need for password entry. If the network uses a router withoutWPS, entering the network password is required. l Connecting to the Wi-Fi network generated by…