Version 1.3, February 2024 Configure and Operate Load Control Devices 1 Configure and Operate Load Control Devices — Application Note This application note describes how to configure load control devices and the available operating modes for your customers. Revision history Version 1.3, February 2024: Latest Firmware version — 4.20. Home Network and Zigbee are now compatible Version 1.2, November…
Version 1.5, May 2022 1 Application Note - SolarEdge Inverter - Alternative Power Source Version History Version 1.5 (May 2022) – add note - Disabled external control functions in Alternative Power Source mode Version 1.4 (March 2020) – Update of the minimum supported CPU version for three phase inverters to 4.8.xxx Version 1.3 (January 2020) – Addition of dry/wet contacts connection diagrams…
Application Note - Wi-Fi Password Configuration You can configure Wi-Fi communication using one of the following methods: l WPS (Wi-Fi Protected Setup) - a feature built into modern broadband routers which allows pairing of devices without the need for password entry. If the network uses a router withoutWPS, entering the network password is required. l Connecting to the Wi-Fi network generated by…
Version 1.0, November 2021 1 Registering the SolarEdge Home EV Charger Registering the SolarEdge Home EV Charger After the EV Charger has been installed, make sure to register it in the SolarEdge Monitoring Platform. This will allow you to perform the following actions with the EV Charger in the mySolarEdge application: Monitor its status Associate a car/cars View the charging history Generate…
Version 1.1, April 2022 1 Technical Note - SolarEdge Home Network Plug-in Kit Selection Technical Note - SolarEdge Home Network Plug-in Kit Selection Refer to the table below to select the appropriate SolarEdge Home Network Plug-in kit for your inverter. For installation instructions, refer to the installation guide that comes with the kit. Inverter Inverter Part Number Inverter Cellular Socket…