Backup Interface Installation Checklist 1. Installation and Wiring at the Backup Interface 1.1 Check the torque of all the securing bolts for the mounting bracket and conduit holder. ◻ 1.2 Check the torque of all the electrical connections inside the Backup Interface ◻ 1.3 Take a photograph of the Backup Interface connection area (useful for future debugging, if necessary). ◻ 1.4 If required,…
`1 2 B. Install the circuit breaker 3 OFF Main Service Panel 1 5 OFF 2 Main breaker switch applicable for BI-E only OFF 3 17 in*lbs 23 in*lbs 6 A. Power off the system and open the Backup Interface Inverter Circuit Breaker Installation for connecting an additional inverter to the Backup Interface (BI-N and BI-E models) ELECTRICAL SHOCK HAZARD C. Mount the dead front D. Connect an additional…
1.2 Contents Disclaimers 3 Important Notice 3 Emission Compliance 3 Support and Contact Information 4 Revision History 5 Version 1.1 (June 2018) 5 Version 1.0 - initial release (June 2017) 5 HANDLING AND SAFETY INSTRUCTIONS 6 Safety Symbols Information 6 About This Guide 7 Chapter 1: Introducing the Commercial Gateway 8 Overview 8 Commercial Gateway Interfaces 9 LCD and LCD-Menu Buttons 9…
Temperature Sensor Kit Installation This document describes how to install a SolarEdge PT100 temperature sensor and connect it to the residential water heater and to the SolarEdge Smart Energy Hot Water device. The sensor allows you to measure the water temperature in the water heater. After installing the sensor, you will be able to view the temperature using SolarEdge monitoring platform.…