Three Phase Inverter with SetApp Configuration PN: SEXXK-XXXXIXXXX Quick Installation Guide For Europe, APAC and South Africa Version 1.3 P. 01 > EN FR NL IT DE P. 23 > PL ES CHT PT SE EN FR NL IT DE EN 1. Turn ON/OFF/P Switch to OFF (0) 2. Turn Safety Switch to OFF 3. Open cover screws FR 1. Placer le commutateur MARCHE/ARRÊT sur ARRÊT (0) 2. Placer l’interrupteur de sécurité sur ARRÊT 3.…
1 MAN-01-00615-1.2 StorEdge Interface Wiring and On Site Check Quick Guide StorEdge Interface Wiring and On-Site Check List for Single Phase Inverters with HD-Wave Technology and SetApp Configuration – for Europe, APAC and South Africa Revision History Revision 1.2 (December 2019) – Spanish translation added. Overview This document provides instructions for wiring and post-installation…
Communication Board Replacement in Single Phase Inverters with HD-Wave Technology and SetApp Kit Contents Communication board Required Tools 4mm hex key Phillips screwdriver 3mm flat screwdriver Removing the Inverter Cover If the inverter cover is not already removed, use the following procedure for cover removal. To remove the inverter cover 1. Turn the inverter ON/OFF/P switch to OFF. Wait 5…
NOTE For maximum range, make sure to position the antenna upright. NOTE This option is only applicable for StorEdge Single Phase Inverters. ZigBee/Wi-Fi Antenna Installation Kit Contents Antenna with the attached clip and cable Safety Information Please review the following safety guidelines, and observe them when handling the equipment. Always power down the inverter before opening the unit.…