Version 1.3, June 2021 1 Meeting Hawaii Utility Interconnect Requirements Version History Version 1.3 – June 2021 – Added new three phase inverter model numbers under Appendix A Version 1.2 – May 2019 – Added three phase inverter model numbers; and DSP2 version; and SetApp inverter requirements; removed non-installer related information Version 1.1 – Dec. 2018 – Updated HPUC Member Website Links…
Replacing a Single Phase HD-Wave Inverter This installation guide describes the procedures for replacing a Single Phase HD-Wave Inverter. Kit Contents Spacer for adjusting the Safety Switch wall bracket Required Tools 4mm hex key Phillips screwdriver 3mm (small) Flat screwdriver Removing the Inverter Cover Use the following procedure to remove the inverter cover. To remove the inverter cover 1.…
Technical Note Connecting the Home Hub Inverter to Multiple Home Batteries – North America Version 1.1 March 2025 Table of Contents Version History ......................................................................................................................... 3 Overview…
Version 1.0, May 2018 1 ISO New England (ISO-NE) Configuration Instructions Version History Version 1.0 – May 2018 – Initial release Introduction This instruction is provided to meet the Inverter Source Requirement Document as published by ISO New England (ISO-NE) in February of 2018. All SolarEdge inverter products produced after work week 14 of 2017 can be programmed appropriately and have…
Version 1.6, Mar 2019 1 SolarEdge Instruction - California Electric Rule 21 Version History Version 1.6, March 2019: Rule 21 phase 3 adaptation Version 1.5, Aug 2018: Simplified inverter configuration instructions to meet requirements Introduction Electric Rule 21 describes the interconnection, operating and metering requirements for generation facilities to be connected to the public utilities‘…
