Version 1.6, Mar 2019 1 SolarEdge Instruction - California Electric Rule 21 Version History Version 1.6, March 2019: Rule 21 phase 3 adaptation Version 1.5, Aug 2018: Simplified inverter configuration instructions to meet requirements Introduction Electric Rule 21 describes the interconnection, operating and metering requirements for generation facilities to be connected to the public utilities‘…
Version 1.2, May 2018 Application Note – Alternate Current Transformer Selection, North America Version history Version 1.2, April 2018 – product name change from "SolarEdge Electricity Meter" to "Energy Meter" Version 1.1, January 2018 – clarified CT compatibility requirements and added CT options Version 1, October 2017 – initial version Introduction The Energy Meter (refer…
Replacing a Single Phase HD-Wave Inverter This installation guide describes the procedures for replacing a Single Phase HD-Wave Inverter. Kit Contents Spacer for adjusting the Safety Switch wall bracket Required Tools 4mm hex key Phillips screwdriver 3mm (small) Flat screwdriver Removing the Inverter Cover Use the following procedure to remove the inverter cover. To remove the inverter cover 1.…
Revision 1.0, November 2020 1 Application Note–Backup Interface Installation Best Practices Application Note–Backup Interface Installation Best Practices Revision History Revision 1.0 - November 2020 Initial release Introduction SolarEdge’s Backup Interface is designed to create a microgrid during power outages by disconnecting the home from the grid. This application note provides information…
Error Codes The error messages include an error number (in firmware version 3.18xx and before) or a code (in firmware version 3.19xx and later) and a description: E r r o r C o d e X X X ( 3 x D 2 ) E r r o r C o d e 3 x D 2 < L i n e 1 > < L i n e 2 > XXX: The error number (firmware version 3.18xx and before). (#-X#): A code indicating the source of error and the error information (…