Version 1.1, January 2023 1 MAN-01-00826-1.1 DC Surge Protection Device Installation/Replacement in Three Phase Inverters with Synergy Technology DC Surge Protection Device Installation/Replacement in Three Phase Inverters with Synergy Technology P/N: SExxK-xxxxIxxxx NOTE There are two types of DC Surge Protection Device (SPD) mounting systems for Synergy Manager, Horizontal and Vertical mounting…
ON/OFF/P Switch Replacement in Energy Hub Inverters Kit Contents ON/OFF/P switch with cables Mounting nut Gasket Plastic tie Required Tools 4mm Allen key Knife Pliers Removing the Inverter and Connection Unit Covers 1. Turn off the ON/OFF/P switch. Wait 5 minutes. 2. Turn off the DC switch on the Connection Unit. 3. Turn off AC to the inverter on the main distribution panel. 4. Release the Allen…
Replacement of AC to DC Fuses i n Three Phase Inverters with Synergy Technology P/N: SExxK-xxxxIxxxx This guide explains how to replace the AC to DC fuses in the Three Phase Inverter with Synergy Technology P/N: SExxK-xxxxIxxxx. Revision History Version 1.0 (January 2021) Kit 1 0 C Fu o se n s tents Required Tools 4 mm Allen torque wrench Torque Phillips screwdriver 3 mm flat head screwdriver…
Replacement of AC Panel in Three Phase Inverters with Synergy Technology for North America and Australia This guide explains how to replace the AC Panel in the Three Phase Inverter with Synergy Technology. Revision History Version 1.0 (October. 2021) Kit Contents Replacement AC Panel Required Tools 4 mm Allen torque wrench Torque Phillips screwdriver 3 mm flat head screwdriver Removing the…
Replacement of Communication Connector in the Synergy Unit of the Three Phase Inverter with Synergy Technology This manual describes how to replace the Communication Connector in the Synergy Unit of the Three Phase Inverter with Synergy Technology. Figure 1: Communication Connector of the Synergy Unit Kit Contents Communication harness Required Tools Torque wrench with 5 mm hex bit Wire cutter 3…
Replacement of MC4 Connectors of Synergy Unit in Three Phase Inverters with Synergy Technology This manual explains how to replace the MC4 connectors of the Synergy Unit in Three Phase Inverters with Synergy Technology. Figure 1: MC4 Connections of the Synergy Unit Kit Contents One pair of MC4 connectors Required Tools 5mm hex key Torque Phillips screwdriver 3mm flat-blade screwdriver 17 mm (11/…
Centro de Conhecimento