`1 2 B. Install the circuit breaker 3 OFF Main Service Panel 1 5 OFF 2 Main breaker switch applicable for BI-E only OFF 3 17 in*lbs 23 in*lbs 6 A. Power off the system and open the Backup Interface Inverter Circuit Breaker Installation for connecting an additional inverter to the Backup Interface (BI-N and BI-E models) ELECTRICAL SHOCK HAZARD C. Mount the dead front D. Connect an additional…
Backup Interface Installation Checklist 1. Installation and Wiring at the Backup Interface 1.1 Check the torque of all the securing bolts for the mounting bracket and conduit holder. ◻ 1.2 Check the torque of all the electrical connections inside the Backup Interface ◻ 1.3 Take a photograph of the Backup Interface connection area (useful for future debugging, if necessary). ◻ 1.4 If required,…
QualiTech EMC Laboratory 30 Hasivim Street, Petah-Tikva, 49517, Israel Product name BI-AU1P A sample of the above product has been tested by our Laboratory in December 2021 -June 2022 and found to be compliant with relevant sections of the following standards: Manufactured by SolarEdge Technologies Ltd. 1 HaMada Street, Herzeliya 4673335, Israel Tel: +972-9-9576620…
Main Service Panel B acked-up Loads Panel 3 Installation and Operation Guide v. 1.4 SolarEdge Home Backup Interface for use with the SolarEdge Home Hub Inverter – Single Phase 2 1 x 3 2 Connect Backup Interface 1. Turn off connection to grid by switching off the main circuit breaker. 2. Thread the L1, Neutral and Ground wires from the Main Service panel through the supplied ferrite bead. Connect…