1 HANDLING AND SAFETY INSTRUCTIONS Version 1.3, April 2020 Safety Information WARNING! Denotes a hazard. It calls attention to a procedure that, if not correctly performed or adhered to, could result in injury or loss of life. Do not proceed beyond a warning note until the indicated conditions are fully understood and met. CAUTION! Denotes a hazard. It calls attention to a procedure that, if not…
Version 1.4 1 Application Note - Viewing and Setting Inverter Grid Protection Values Application Note - Viewing and Setting Inverter Grid Protection Values Version History Version 1.4, March 2023: Addition of “Vgrid Max 5” and “Vgrid Min 5” protection settings Version 1.3: January 2019: Update of compatible CPU versions Version 1.2: November 2018: New section on how to view and set grid…
Replacing a Single Phase HD-Wave Inverter This installation guide describes the procedures for replacing a Single Phase HD-Wave Inverter. Kit Contents Spacer for adjusting the Safety Switch wall bracket Required Tools 4mm hex key Phillips screwdriver 3mm (small) Flat screwdriver Removing the Inverter Cover Use the following procedure to remove the inverter cover. To remove the inverter cover 1.…
Thank You for Choosing the EV Charging Single Phase Inverter The EV charging inverter enables you to charge your electric vehicle directly from the power of the sun, maximizing your solar usage and reducing your electricity bills. This guide will introduce you to the charging modes available in the Monitoring Platform mobile application. Before starting to charge, connect the EV charger cable to…
Version 1.1, Dec. 2018 Technical Note - Main Distribution Panel Considerations with an EV Charging Single Phase Inverter or StorEdge Single Phase Inverter Version History Version 1.1, Dec. 2018 – Corrected the Max PV formula Added accompanying letter from Bill Brooks, PE Version 1.0, Oct. 2018 – Initial release Introduction The purpose of this document is to provide guidance on a few key…